ANTARIS 2.5
Krabi solar power solutions
Krabi solar power solutions
Krabi Off grid solutions
Krabi Off grid solutions
Krabi e-mobillity

Wholesaler & Retailer for Renewable Energy in Thailand and Asia

Horton-2

- For locations exposed to storm-force winds, optionally with different rotor diameters (2.35 – 3.00 m).

- Low noise blade tip profile

- Grid connected, Heating system and Battery charging

- Storm protection with Helicopter position and electronic brake

- Easy to install


Information about ANTARIS Wind Energy System

The ANTARIS wind turbine is a wind energy system that is ideally suited to inland sites. It is designed specifically for feeding power into the grid, charging batteries (24 VDC / 48 VDC etc.)
and for supporting heating systems.

As a result of its sturdy design, the ANTARIS is also suitable for locations exposed to storm-force winds, optionally with different rotor diameters (2.35 – 3.00m).

The hand-laminated rotor blades benefit from a computer-designed aerodynamic profile. Needless to say, each blade is statically and dynamically balanced, carries an identification number and comes with relevant documentation.

Uncomplicated from the aspect of configuration, importance has been attached to ensuring that these turbines can be quickly assembled and installed by hand. As a result of its robust design, the ANTARIS works with extreme efficiency and not only comes at a highly attractive price in its basic version. Particular attention must be drawn to its excellent start-up behaviour (at wind speeds as low as 2.28 m/s) and very quiet operation (43 dB). This means the system can also be installed in residential areas.

Grid-connected operation requires one inverter (Power One 2.5) with characteristics matched to the ANTARIS and local wind conditions. Alternatively, in less windy areas, grid-connected operation is also possible with a Power One 1.6.

The inverters carry an appropriate declaration of conformity and are approved for grid-connected operation – the ENS (electronic grid guard system) is already integrated!

When the ANTARIS is used in heating applications, a control cabinet with control electronics provides optimum control of the wind characteristic in conjunction with a 6000-watt heating element.


 

Alternator:

 

Turbinedata:

 

Type

Threephases,

permanentmagnet

Type

Gridconnected,

Heatingsystem

Efficiency

94%

Speed range

0 rpm-600rpm

Ratedoutput power

3.0kW

Operationspeed

130 rpm–400 rpm

Maximumoutput power

4.5kW

Start upwindspeed

2.8m/s

Ratedvoltage

350 VAC

Stormprotection

13.0m/s

Protectionclass

IP56

Destructive windspeed

>58 m/s

       

Mechanicaldata:

   Stormprotection  
Repellerdiameter 3.00 m (2.35m) Automaticsystem

Helicopterposition, breaking resistance,

electromagnetic brake

(optional)

Sweeparea 7.065m² (4.335m²)  Manual

Short circuit braking,

Resistorbraking

Blades 3pcs.Carbon/ glassfiber    

Blades protection

UV,chemical and

temperatureresistant

   

Turbine material

Zinc-coatedsteel    
Colour RAL 9010    
Weightcomplete 95kg    

Standard Norms and Certifications:

CE-DIN EN 60204-1
DIN VDE 0113 T 1
DIN EN 12100
DIN EN 418
Accident prevent regulation
BGV A3 (VBG4) According to IEC 61400-2

logo solaris s 120